Key Digital Power over Cat5e/6 HDMI Extender

Item Code: KD-X444SP

4K 18G HDMI over 50m CAT5e/6 Extender Set with HDR, Power over Cat, IR or RS-232

35 (EA) in Stock

Status: In Stock

EA
Comments or instructions

Features

Features

  • Single CAT5e/6 UTP/STP Extension: Fully automatic equalization, and amplification depending on cabling length
  • 4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
  • Flexible Power over CAT (PoC): Only one power connection needed. Tx may power Rx, or Rx may power Tx.
  • Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate transmission channel
  • Low Profile: Super slim chassis design
  • Signal Extension: For resolution and cable quality
    • 4K/UHD (18G) / 4K 10G / 1080p with CAT5e/6: Up to 164ft / 50m
  • 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension.
  • HDR10 (High Dynamic Range): More life-like images through a greater range of luminance
  • HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
  • Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
  • IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
  • Full Buffer Technology: Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles.
  • EDID Management: Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
  • HDCP Authentication: HDCP sources are authenticated by HDCP key on transmit unit, for one-to-one topology
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected display/output device
  • TMDS Re-Clocking: Re-generation of TMDS (AV signal) channel data at Transmit unit for brand new AV signal
  • Surround Audio Support: Up to Dolby®, DTS™ (formats up to 5.1/6.1)

Specifications

Specifications

Specifications for: KD-X444SP: Key Digital Power over Cat5e/6 HDMI Extender
Inputs Tx (Each)1 HDMI, 1 IR, 1 RS-232
Outputs Tx (Each)1 CAT6/6A, 1 IR, 1 RS-232
Inputs Rx (Each)1 UHDoTP, 1 IR, 1 RS-232
Outputs Rx (Each)1 HDMI, 1 IR, 1 RS-232
BandwidthTMDS bandwidth 18Gbps
Deep Color SupportDigital video formats in Deep Color Mode up to 12 bits per color
DDC CommunicationEDID and HDCP Bi-directional buffering from Display to Source
HDMI ConnectorType A, 19 Pin Female
RJ45 ConnectorShielded Link Connector, Proprietary TMDS, IR, RS-232 extension technology
IR In & Out Connectors (Each)3.5mm
RS-232 Connector3-pin phoenix
Power(1) 12V/2A, 24W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. SKU: KD-PS12V2ASC
RegulationCE, RoHS, WEEE, EAC
EnclosureBlack Metal
Product Dimensions (ea) (LxWxH)4.3” x 4.12” x 0.82” (109.2 x 104.6 x 20.8mm)
Product Weight (ea)0.595 lbs (0.27 KG)
Package Dimensions (LxWxH)10.24” x 5.67” x 3.15” (260 x 144 x 80mm)
Package Weight2.34 lbs (1.06 KG)
To top