Cymbol 8-Port Gigabit POE++ Ethernet Switch w/2 Gig RJ45 Uplink

Item Code: CY-GS8POEPP-2

3 (EA) in Stock

Status: In Stock

EA
Comments or instructions

Overview

Overview

Intelligent PoE

Provides control over power consumption and offers real-time monitoring to ensure power supplies receive priority with important ports and to prevent malfunctions caused by changes in power consumption. Supports ultra wide power supplies and is able to adapt to IP Camera power fluctuations.

Hi-PoE 90W (Red port)

The red port supports IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards, with a maximum output power consumption rate of 90W per red port. Suitable for powering Hi-PoE devices.

Long Distance PoE

By dialing or enabling long-range transmission on the WEB interface, the transmission distance of a PoE port can increase up to 250m, meeting the requirements of wired transmission (bandwidth reduced to 10 Mbps).

PoE Watchdog

Adopts the innovative PoE Watchdog. PoE Watchdog can be switched on by toggling on PD Alive. It enables the switch to automatically detect the ports status and restart the failed port in case an IP Camera connection fails.This enables intelligent operation and maintenance management in its truest sense, reducing manual maintenance costs.

8-pin Assignment PoE Power Supply

Supports 8-pin simultaneous power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time. Compatibility with IP Cameras are enhanced. Cable loss is reduced and loading capacity is increased.

Features

Features

  • Intelligent Plug and Play Ethernet Switch
  • 8 x 10/100/1000Mbps RJ45 Ports (PoE++)
    • Port 1 ≤90W, Port 2 – 8 ≤30W, Total 96W
  • 2 x 10/100/1000Mbps RJ45 Ports (Uplink)
  • Hi-PoE 90W (Red port)
  • All-gigabit Ports
  • Long Distance PoE Transmission
  • PoE Watchdog
  • Wide Working Temperature
  • OperatingTemperature: –10°C to 55°C

Specifications

Specifications

Specifications for: CY-GS8POEPP-2: Cymbol 8-Port Gigabit POE++ Ethernet Switch w/2 Gig RJ45 Uplink
Performance
Switching Capacity10 Gbps
Packet Forwarding Rate14.88 Mpps
Packet Buffer Memory1.5 Mbit
MAC Table Size4K
Hardware
Data Transmission Ports1-8: 8 x RJ45 10/100/1000Mbps Ports
9-10: 2 x RJ45 10/100/1000Mbps Ports (Uplink)
Power Supply48–57V DC
Operating Temperature-10°C to +55°C
Operating Humidity10%–90%
POE
PoE BudgetPort 1 ≤90W, Port 2 – 8 ≤30W, Total 96W
PoE Pin AssignmentPoE: 1, 2, 4, 5(V+), 3, 6, 7, 8(V-)
PoE Power ManagementYes
Long Distance PoE TransmissionYes
Power ConsumptionIdling: 3W
Full load: 96W
PoE StandardIEEE802.3af, IEEE802.3at, Hi-PoE, IEEE802.3bt
General
ESDAir discharge: 8kV
Contact discharge: 6kV
Lightning ProtectionCommon mode: 4kV
Differential mode: 2kV
Product Dimensions (W x L x H)190mm × 100mm × 30mm
(7.48” × 3.94” × 1.18”)
Communication StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x
Transmission Performance
Switch power supply voltage 53V.
CAT5E/CAT6. Max. DC resistance < 10 Ω/100 m
Cable (M)Load Capacity (W)Bandwidth (Mbps)
EEE802.3bt 90 W
10071.3100
1506210
2005110
2504010
Hi-PoE 60 W
10053100
1505010
2004710
2503710
IEEE802.3at 30 W
10025.5100
15025.510
20025.510
25025.510
Note: Data from this table was collected by our manufacturers test lab and is for reference only. The actual transmission distance may vary due to power consumption of connected devices or the cable type and status.

Resources

To top